Saturday, September 15, 2012

CANON RESET IP 2700 FREE DOWN LOAD ONLINE

How to reset canon  waste ink counter is full, you need to reset it.

First Step of Reset Canon iP 2700

Step 1: enter in service mode in order to used the resetter: 

  • Turn off the printer without pulling the power cords.
  • Hold down Resume button and press Power button.
  • Keep holding down Power button and let Resume button go.
  • Then Press Resume button 5 times then let both buttons go.
  • The Alternate Blinking error is gone: the printer is in Service Mode state.

Step 2

  • Extract the resetter and double click "servicetool.exe"
  • Click Reload Button and you will get a new USB port.
  • Load some papers in your printer and press the "Main" Button, wait until it shows "error 001" then press OK.
  • Then press "EEPROM" button and the printer will print some text, after that click OK
  • Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again. 
  • That's done.
Troubleshooting:
  • Error Canon iP 2700  with the Service tool: 
After clicking "Maint button" on clear ink counter section the program hang up, wait for e few minutes still the progam not responding.

1 comment: